Rychlá dodávka pro úplnou výměnu bezpečnostního senzoru

Domů / vše / Safety Products / Photoelectric Sensors / GM18 Series /

Photoelectric Sensors Through-beam Sensors GM18 Series

Photoelectric Sensors Through-beam Sensors GM18 Series
Photoelectric Sensors Through-beam Sensors GM18 SeriesPhotoelectric Sensors Through-beam Sensors GM18 SeriesPhotoelectric Sensors Through-beam Sensors GM18 SeriesPhotoelectric Sensors Through-beam Sensors GM18 Series

Photoelectric Sensors Through-beam Sensors GM18 Series

kategorieGM18 Series
Obchodní značkaDADISICK
SpecifikaceGM18 Series | GM18-500, GM18-1500
Size:M18 x 55 mm, M18 x 73 mm
Detection range:5000 mm, 15000 mm
Material:Nickel-copper alloy
Connection type:3pin/4pin with 2 M cable
Operating temperature:-15℃ ~ +55℃, no freezing
stažení
Čas editace2025/3/12
Více detailů
Reflection method
Through-beam
Model
GM18-500
GM18-1500
Detection Distance
5000 mm
15000 mm
Output Mode
NPN NO / NC, PNP NO / NC
Repeat Accuracy
<5%
Switch Mode
L.on (light-incoming action) / D.on (light-blocking action) switchable
Indicator Light
Yellow LED
Response Time
<5 ms
Operating Voltage
10 ~ 30 V DC
Consumption Current
<30 mA
Load Current
<200 mA
Operating Temperature
-15℃ ~ +55℃, no freezing
Environmental Humidity
35% ~ 95% RH, no condensation
Protection Circuit
Reverse polarity protection/short circuit protection/anti-interference protection
Protection Level
IP66
Wire Outlet Method
3pin/4pin with 2 M cable
Material
Nickel-copper alloy
Light Source
Invisible infrared light (880 nm)
Dimensions  (unit: mm)

M18 Series Through-beam Sensors Dimensions
Photoelectric Sensors Through-beam mode GM18 Series Wiring method
Photoelectric Sensors Through-beam mode GM18 Series Wiring method
Data sheet
GM18 Series Through-beam Photoelectric Switch Sensor Data Sheet
Hodnocení
  • Loading ...
Související produkty
    Poslat dotaz
    *Email
    Vaše celé jméno
    *Titul
    *Obsah
    Nahrát
    • Podpora pouze .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximálně 20 milionů