Rychlá dodávka pro úplnou výměnu bezpečnostního senzoru

Domů / vše / Safety Products / Safety Interlock Switches Devices / OX-D2/OX-D3 Series /

OX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICK

OX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICK
OX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICKOX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICKOX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICKOX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICKOX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICK

OX-D2/OX-D3|The Safety Interlock Switches with locking function|DADISICK

kategorieOX-D2/OX-D3 Series
Obchodní značkaDADISICK
SpecifikaceOX-D2 & OX-D3
Full range of gold-plated contactsConfigure 5 contact structures
Suitable for standard and small loadsAdjust up to 8 directional key operation holes
IEC/EN60947-5-1GB14048.5-2017
Čas editace2024/11/21
Více detailů
Safety Interlock Switches Performance Specifications
Applicable standard
IEC/EN60947-5-1/GB14048.5-2017
Protection level*1
IP65/IP67 (EN60947-5-1 key operation hole)
Service life*2
More than 1 million machinery/more than 300,000 times of electricity
Rated insulation voltage (Ui)
400V
Rated impulse withstand voltage (Uimp)
4KV
Rated open thermal current (Ith)
8A
Use category
AC-15
Rated working voltage (Ue)
AC400V
Rated operating current (le)
2A
Rated limited short-circuit current
1000A
forced disengagement force
≥60N
Forced breakaway distance
≥10mm
Operating frequency
≤ 20 times/minute
Ambient temperature
-20°C~60°C (not freezing)
Environment humidity
Below85%RH
1. The above values are initial values.
2. The contacts of the switch are shared by standard and small loads, but the contacts that operate on a certain load cannot be connected to a load with a smaller capacity for use. Failure to do so may result in damage to the contact surface and reduced contact reliability.
3. Although the switch housing can prevent dust or water from entering, do not use the switch where foreign matter such as powder, water or medicine may enter the keyhole of the switch head, otherwise wear, damage or malfunction of the switch may occur.
4.The conditions for durability are an ambient temperature of 5°C to 35°C and an ambient humidity of 40% to 70%.
DIMENSION
Dimensions of Safety Interlock Switches
ACCESSORIES
SAFETY RELAY
Safety Relay LS-A
safety relay for Dadisick Safety Light Curtains
safety relay Ter-A
safety relay for Dadisick Safety Light Curtains
WIRING DIAGRAM
Wiring Diagram Between The Safety Switch and The LS-A Safety Relay
Wiring Diagram Between The Safety Switch and The LS-A Safety Relay
Wiring Diagram Between The Safety Switch and The Ter-A Safety Relay
Wiring Diagram Between The Safety Switch and The Ter-A Safety Relay
SAFETY DOOR HANDLES
DOCUMENTS & DOWNLOADS
CATALOGUE

Safety Interlock Switch Devices OX-D2 & OX-D3 series technical data sheet
3D
OX-D2 & OX-D3.3D-STP
Hodnocení
  • Loading ...
Související produkty
    Poslat dotaz
    *Email
    Vaše celé jméno
    *Titul
    *Obsah
    Nahrát
    • Podpora pouze .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximálně 20 milionů